linux的shutdown命令详解（linux系统的shutdown命令）

大家好,今天就和小月一起来看看这个问题吧 。linux系统的shutdown命令，linux的shutdown命令详解很多人还不知道，现在让我们一起来看看吧！

linux的shutdown命令详解

命令简介：

该命令可以安全关闭或者重新启动系统。你没有看错，关机命令不仅可以关闭系统、也可以重启Linux操作系统操作系统系统。

命令语法：

/sbin/shutdown [-t秒][-arkhnchp]时间[警告消息]

命令参数：

参数

长参数

描叙

[构成动植物的古名或拉丁化的现代名]

使用/etc/shutdown.allow .

-丙

中断关机：当执行关闭-h 12:00 '指令时，只要按键就可以中断关机的指令

-f

重新启动时不进行磁盘检测(fsck)

-F

重新启动时进行磁盘检测(fsck)

-h

关闭电源

-k

模拟关机（不是真的关机),只是向登录者发送警告信息出去！

同表示“发展”、“创造”或“状态的加剧”:widen | deepen | loosen

不调用初始化进程进行关机，而是强行关机

-r

关闭系统然后重新启动，类似于Windows操作系统操作系统平台重新开始

相当于表示“有…的”

延迟关机的时间

-w

仅做测试，并不真的将系统重新开机，只会把重开机的数据写入/var/log目录下的户信息记录文件

-救命

显示命令在线帮助

Linux操作系统操作系统的关机命令使用示例

1: 查看重新启动命令的帮助信息

[root@db-server ~]# shutdown -帮助

关闭：无效选项- -

用法：关机[-akrhHPfnc] [-t秒]时间[警告消息]

-a:使用/etc/shutdown.allow

-k:不要真的关机，只警告。

-r:关机后重新启动。

-h:关机后停机。

-P:停机动作是关闭电源。

-H:停止动作只是停止。

-f:进行"快速"重启（跳过fsck).

-F:在重新启动时强制fsck .

-n:不通过“初始化”，而是快速下降。

-c:取消正在运行的关机。

-t秒：警告和终止信号之间的延迟。

**时间参数是必需的！（尝试"立即")**

[root@db-server ~]#

[root@db-server ~]# man关机

(8) Linux系统管理员关机鈥檚手动关闭(8)

名字

关机-关闭系统

摘要

/sbin/shutdown [-t秒][-arkhnchp]时间[警告消息]

描述

关机以安全的方式关闭系统。所有登录的用户都会收到系统正在运行的通知

关闭，登录(1)被阻止。可以立即或在指定的延迟后关闭系统。

信号终止信号首先通知所有进程系统正在关闭。这给了程序像

六(1)保存正在编辑的文件、邮件和新闻处理程序的时间

　　shutdown does its job by signalling the init process, asking it to change the runlevel. Runlevel 0 is used to

　　halt the system, runlevel 6 is used to reboot the system, and runlevel 1 is used to put to system into a state

　　where administrative tasks can be performed; this is the default if neither the -h or -r flag is given to shut-

　　down. To see which actions are taken on halt or reboot see the appropriate entries for these runlevels in the

　　file /etc/inittab.

　　OPTIONS

　　-a Use /etc/shutdown.allow.

　　-t sec Tell init(8) to wait sec seconds between sending processes the warning and the kill signal, before

　　changing to another runlevel.

　　-k Don鈥檛 really shutdown; only send the warning messages to everybody.

　　-r Reboot after shutdown.

　　-h Halt or poweroff after shutdown.

　　-H Halt action is to halt or drop into boot monitor on systems that support it.

　　-P Halt action is to turn off the power.

　　-n [DEPRECATED] Don鈥檛 call init(8) to do the shutdown but do it ourself. The use of this option is dis-

　　couraged, and its results are not always what you鈥檇 expect.

　　-f Skip fsck on reboot.

　　-F Force fsck on reboot.

　　-c Cancel an already running shutdown. With this option it is of course not possible to give the time argu-

　　ment, but you can enter a explanatory message on the command line that will be sent to all users.

　　time When to shutdown.

　　warning-message

　　Message to send to all users.

　　The time argument can have different formats. First, it can be an absolute time in the format hh:mm, in which

　　hh is the hour (1 or 2 digits) and mm is the minute of the hour (in two digits). Second, it can be in the for-

　　mat +m, in which m is the number of minutes to wait. The word now is an alias for +0.

　　If shutdown is called with a delay, it creates the advisory file /etc/nologin which causes programs such as

　　login(1) to not allow new user logins. Shutdown removes this file if it is stopped before it can signal init

　　(i.e. it is cancelled or something goes wrong). It also removes it before calling init to change the runlevel.

　　The -f flag means 鈥榬eboot fast鈥? This only creates an advisory file /fastboot which can be tested by the sys-

　　tem when it comes up again. The boot rc file can test if this file is present, and decide not to run fsck(1)

　　since the system has been shut down in the proper way. After that, the boot process should remove /fastboot.

　　The -F flag means 鈥榝orce fsck鈥? This only creates an advisory file /forcefsck which can be tested by the sys-

　　tem when it comes up again. The boot rc file can test if this file is present, and decide to run fsck(1) with

　　a special 鈥榝orce鈥?flag so that even properly unmounted filesystems get checked. After that, the boot process

　　should remove /forcefsck.

　　The -n flag causes shutdown not to call init, but to kill all running processes itself. shutdown will then

　　turn off quota, accounting, and swapping and unmount all filesystems.

　　ACCESS CONTROL

　　shutdown can be called from init(8) when the magic keys CTRL-ALT-DEL are pressed, by creating an appropriate

　　entry in /etc/inittab. This means that everyone who has physical access to the console keyboard can shut the

　　system down. To prevent this, shutdown can check to see if an authorized user is logged in on one of the vir-

　　tual consoles. If shutdown is called with the -a argument (add this to the invocation of shutdown in /etc/init-

　　tab), it checks to see if the file /etc/shutdown.allow is present. It then compares the login names in that

　　file with the list of people that are logged in on a virtual console (from /var/run/utmp). Only if one of those

　　authorized users or root is logged in, it will proceed. Otherwise it will write the message

　　shutdown: no authorized users logged in

　　to the (physical) system console. The format of /etc/shutdown.allow is one user name per line. Empty lines and

　　comment lines (prefixed by a #) are allowed. Currently there is a limit of 32 users in this file.

　　Note that if /etc/shutdown.allow is not present, the -a argument is ignored.

　　HALT OR POWEROFF

　　The -H option just sets the init environment variable INIT_HALT to HALT, and the -P option just sets that vari-

　　able to POWEROFF. The shutdown script that calls halt(8) as the last thing in the shutdown sequence should

　　check these environment variables and call halt(8) with the right options for these options to actually have

　　any effect. Debian 3.1 (sarge) supports this.

　　FILES

　　/fastboot

　　/etc/inittab

　　/etc/init.d/halt

　　/etc/init.d/reboot

　　/etc/shutdown.allow

　　NOTES

　　A lot of users forget to give the time argument and are then puzzled by the error message shutdown produces.

　　The time argument is mandatory; in 90 percent of all cases this argument will be the word now.

　　Init can only capture CTRL-ALT-DEL and start shutdown in console mode. If the system is running the X window

　　System, the X server processes all key strokes. Some X11 environments make it possible to capture CTRL-ALT-DEL,

　　but what exactly is done with that event depends on that environment.

　　Shutdown wasn鈥檛 designed to be run setuid. /etc/shutdown.allow is not used to find out who is executing shut-

　　down, it ONLY checks who is currently logged in on (one of the) console(s).

　　AUTHOR

　　Miquel van Smoorenburg, miquels@cistron.nl

　　SEE ALSO

　　fsck(8), init(8), halt(8), poweroff(8), reboot(8)

　　November 12, 2003 SHUTDOWN(8)

　　(END)

　　2：马上关闭Linux系统，其中 now 相当于时间为 0 的状态

　　[root@db-server ~]# shutdown -h now

　　Broadcast message from root (pts/1) (Sat Jan 10 18:51:34 2015):

　　The system is going down for system halt NOW!

　　3：系统2分钟后重新启动，其中+m表示几分钟后关机或开机。

　　[root@db-server ~]# shutdown -r +2

　　Broadcast message from root (pts/2) (Sat Jan 10 19:56:00 2015):

　　The system is going DOWN for reboot in 2 minutes!

　　4：设置系统在那个时间点关机

　　[root@db-server ~]# shutdown -h 12:30

　　或

　　[root@db-server ~]# shutdown -h 12:30 &

　　[1] 4578

　　最好是使用命令&将关机命令至于后台处理。不影响当前其它操作。

　　设置多久时间后执行shutdown命令。时间参数有hh：mm或+m两种模式。hh：mm格式表示在几点几分执行shutdown命令。例如 “shutdown 10：45”表示将在10：45执行shutdown.+m表示m分钟后执行shutdown.比较特别的用法是以now表示立即执行shutdown. 值得注意的是这部分参数不能省略。另外，需要注意如果现在已经22:30，你执行了shutdown -h 22:00 & 那么第二天才会关机。

　　5：将前一个shutdown命令取消息

　　如下所示，执行了下面命令让Linux在12:30关机，但是如果发现这个时间点不合适，那么可以使用CTRL+C取消

　　[root@db-server ~]# shutdown -h 12:30

　　Shutdown cancelled.

　　[root@db-server ~]#

　　也可以在另外一个命令窗口执行下面命令

　　[root@db-server ~]# shutdown -c

　　6：向所有登录的用户发出信息

　　[root@db-server ~]# shutdown -k "now"

　　Broadcast message from root (pts/2) (Sat Jan 10 20:09:14 2015):

　　The system is going down to maintenance mode NOW!

　　Shutdown cancelled.

　　另外登录的会话窗口会收到如下信息

　　[root@db-server ~]#

　　[root@db-server ~]#

　　Broadcast message from root (pts/2) (Sat Jan 10 20:11:34 2015):

　　The system is going down to maintenance mode NOW!

　　一般使用下面语法，如下所示

　　[root@db-server ~]# shutdown -k now "The Server will shutdown now"

　　Broadcast message from root (pts/1) (Sat Jan 10 20:14:54 2015):

　　The Server will shutdown now

　　The system is going down to maintenance mode NOW!

　　Shutdown cancelled.

　　7：重新启动时不进行磁盘检测

　　[root@db-server ~]# shutdown -fr now

　　Broadcast message from root (pts/1) (Sat Jan 10 20:23:59 2015):

　　The system is going down for reboot NOW!

　　8：在多少秒后关闭系统并给用户发送提示信息

　　[root@db-server ~]# shutdown -t 10 -h now "System will shutdown 10 sencond later"

　　Broadcast message from root (pts/1) (Sat Jan 10 20:33:36 2015):

　　System will shutdown 10 sencond later

　　The system is going down for system halt NOW!

这篇文章到此就结束，希望能帮助到大家。